J1CK6136i Economical Horizontal CNC Lathe
View:
The CK6136i CNC lathe is based on the MAZAK-MATE360 precision horizontal lathe produced by our company in cooperation with Japan's Yamazaki Corporation (MAZAK). It has accumulated many years of experience in the production of CNC machine tools and has been developed through the secondary development of CNC. A low-cost CNC lathe with advanced performance, reliable quality, wide adaptability and high cost performance. The machine tool adopts an integral bed base, fully enclosed protection, and imported spindle bearings. Compared with similar products, it has outstanding features such as high rigidity, high precision, good accuracy and good dimensional consistency of processed workpieces.
J1CK6136i Economical Horizontal CNC Lathe Main Specifications Table (Standard Configuration)
|
項目Item |
J1CK6136i |
|
|
A手動兩檔 Manual 2-step |
B單軸全無級Gearless |
|
|
床身上******回轉直徑(mm)Max swing over bed |
φ360 |
|
|
滑板上******回轉直徑(mm)Max swing over cross slide |
φ160 |
|
|
******車削直徑(mm)Max turning diameter |
φ360 |
|
|
主軸******轉速(r/min)Max spindle speed |
低檔L:35-400 高檔H:215-2500 |
150-3000 |
|
主軸頭/主軸通孔直徑(mm)Spindle nose/spindle bore |
A2-5 /φ40 |
A2-5 /φ52 |
|
卡盤規格(吋inch)Chuck size |
6（手動三爪Manual 3-jaw chuck） |
|
|
主軸電機功率(kW)Spindle motor power |
4.0 |
5.5 |
|
X/Z軸******行程(mm)X/Z axis travel |
X:210/Z:470,970 |
|
|
X/Z軸快速移動速度(m/min)Rapid traverse rate of X/Z axis |
6/8 |
|
|
刀架形式/車刀規格Turret type/size of tool |
電動四方electric square turret/20x20 |
|
|
數控系統CNC system |
GSK980TD |
|
